Mitigating and minimizing Energy Loss In Your Greenhouse

 

As energy costs continue to rise, growers to need to know what their options are to help reduce energy inefficiencies to grow healthy crops and maximize their profits.

Solar power, also known as photovoltaic (PV) systems, LED lights (light-emitting diode) and infrared heaters are all some of the technologies being looked at as ways to reduce greenhouse energy costs. But the first step in any investment is to reduce any existing energy inefficiencies in your greenhouse.

Manage the temperature based on the crop and finish date. Do you grow the crop cooler for a longer period of time or warmer for a shorter period of time? It saves energy to grow at a warmer temperature for a shorter time.

Close air leaks. Seal vents, doors and fan openings with weather stripping, and cover exhaust fan openings when not in use. Fix any tears in the poly and replace any cracked or missing glass panes. Close up those leaky spots in the greenhouse. You don’t want energy savings to go out of the door or out of the poly.

Horizontal air flow fans help mix the air in the greenhouse and can help keep temperatures uniform. The fans also mix the humidity and CO2. Consistent air temperature throughout the crop will ensure the crop grows as uniformly as possible.

Install infrared (IR), anti-condensate poly film. The IR film treatment lets sunlight in but traps the radiant heat inside the greenhouse. The anti-condensate treatment reduces the surface tension on the poly allowing condensation to flow down the poly and not form droplets. You don’t have as many drops of condensation on the underside of the poly. The droplets can block sunlight, drip on plants and workers, create an environment conducive for pathogens and create safety issues such as slippery algae on the floor.

Use photoperiodic lighting on long-day plants. Long-day plants flower when the dark hours fall below their critical photoperiod. Properly timed supplemental lighting can artificially reduce the number of nighttime hours. You use photoperiodic lighting to induce flowering. The goal is to grow a quality plant as fast as you can.

Incandescent lamps alternating with compact fluorescent lamps are effective for stimulating flowering of long-day plants. LED lights can also be used to regulate flowering by photoperiodic lighting, but choose the LED lights carefully. LED lights are a major investment and there are many LED lamps available. Their light spectrum varies and sometimes causes confusion on how to use them. You need to be careful about what you’re using.

Use high-intensity light on young plants. High-intensity lights are most economical for growing young plants because you have so many plants per square foot.

Transplant larger plugs and liners. Plants in larger plug trays take less time to finish growth, but larger plugs do cost more.

Use more energy-efficient heaters. Some heat is always lost with the exhaust gases, but more energy efficient heaters lose less. The most efficient heaters for greenhouses have up to 96% thermal efficiency.

Insulate side, knee and end walls. Whenever the temperature in the greenhouse is different than the outside air, heat energy will move through the structure materials from the warm side to the cool side.

Install retractable energy curtains. The curtains shade the crop on sunny days in the spring and summer and keep heat in the greenhouse at night during the winter. Installing energy curtains isn’t going to be profitable in every situation. If you start growing in March, you’re probably not going to need one. If you’re growing in the winter to get plants to market in March, they are very cost effective.

Install more energy efficient lamps. LED lamps continue to improve and lamps with a photosynthetic photon efficacy (μmol×J–1) of greater than two are available. Make sure to ask about that efficacy number prior to purchasing lamps.

Install in-floor heat to increase substrate temperature and to decrease air temperature. You can lower your air temperature and increase your substrate temperature if you have root zone heating.

Use environmental control systems. They’re more responsive and growers don’t have to manually alter the environment several times a day.

For growers who want to consider solar, consider getting an energy audit to assess your system. That’s where you want to start.

Most public utilities and electric cooperatives offer free energy audits, but they are not the type 2 audits. The American Society of Heating, Refrigeration and Air-Conditioning Engineers defines three levels of energy audits types 1, 2 and 3 with the larger numbers having greater detail and accuracy.

Type 2 audits are required to participate in the Natural Resources Conservation Service (NRCS) Environmental Quality Incentives Program (EQIP) and the USDA Rural Development’s Rural Energy for America Program (REAP).

EQIP provides funding up to 75% of the cost of eligible projects that increase energy efficiency. REAP provides grants up to 25% of the total eligible project cost and loan guarantees for up to 75% of the total eligible project cost to purchase or install renewable energy systems or make energy efficiency improvements. Now is a good time to get into a renewable energy and we would like to partner with you to evaluate your operation for energy efficiency & renewable energy.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s